Vertical Milling&Boring Machining Center AV-3020

●Using the most advanced Computer Aided Design Finite Structural Analysis programs, an extremely rigid machine base foundation was created that supports and maintains the outstanding accuracy of this performance machine suited for medium to large moulds machining. ●Unique single-pieced columns, upper beam and machine base, massive and rugged. Extensive use of Computer Aided Design for ribbing size, shape, and positioning helps absorb the tremendous motion and mass dynamics encountered in high speed machining, provides extensive vibration damping and thermal stability, and creates extreme rigidity. ●The 3400 x 2185 mm worktable, fitted with 16 pieces sliding blocks, has been overly engineered cast and then machined to provide a Rock-Solid platform with high loading capabilities. ●Oversized high precision linear guideways are utilized to provide low starting inertia, low friction and high acceleration rates optimizing servo drive response for excellent axis positioning and repeatability over the full stroke on the X, Y, and Z axes. ●A safety torque coupling on each axis protects the ballscrew and servo drive motor. ●Double Automatic Tool Changers, 20 tools (A63) and 16 tools (A100), are built inside the U-shape of machine columns. The disc magazine ATC is utilized for its simple but highly reliable design.

Product Information

橫樑+主軸
Unique 2-in-1 double heads design with standard HSK-A100 8000rpm and HSK-A63 24000 rpm, to perform fast roughing and perfect finishing on the same machine in one set-up. Higher efficiency and better accuracy are assured.

橫樑+主軸
Massive U-shape columns, big spans provide depandable support to upper beams. Closed design of the double-beam and cross-slide (box in box design) with internal to prevent overhang and unsymmetrical.

滾珠螺桿
Extra wide machine base, massive and sturdy constructed with conform to dynamic theorem, is tempered and vibration treated. Densed Multiple-point footprint will keep a constant level state for maximum table load and without deformation.

整機正面
Full-open designed sheet metal enclosure, pneumatic activated and anti-clip, for easy access and convient big workpiece load and unload.

TRAVEL

X axis (table left / right)

3,000 mm

Y axis (spindle in / out)

2,000 mm

Z axis (spindle vertical)

HSK-A100 : 800 mm

HSK-A63 : 800 mm

HSK-A100 Spindle nose to table surface(min/max)

H: 400-1,200 mm

L: 200-1,000 mm

HSK-A63 Spindle nose to table surface(min/max)

H: 468-1,268 mm

L: 268-1,068 mm

X/Y/Z drive protection

Direct torque limit coupler

TABLE

Size

3,400 x 2,185 mm

T-slot (W x No. x P)

22 x 11 x 191.25 mm

Max. table load (evenly distributed)

15,000 Kgs

SPINDLE (built-in)

HSK-A63

Spindle speed

24,000 RPM

Motor

289 Kw, 69 Nm

HSK-A100

Spindle speed

8,000 RPM

Motor

32 Kw, 300 Nm

Oil chiller

±1℃ of ambient shop temperature

FEED RATES

HSK-A100 cutting feed

1-20,000 mm/min

HSK-A63 cutting feed

1-20,000 mm/min

X/Y/Z rapid traverse

20,000 mm/min (0%, 30%, 50%, 100%)

AUTOMATIC TOOL CHANGER (Disk magazine)

HSK-A63, 20 tools  Max. tool dia. /length/weight

Ø35 mm / 220 mm / 7kg

HSK-A100, 16 tools  Max. tool dia. /length/weight

Ø66 mm / 350 mm / 12kg

AIR SUPPLY

Pressure / Consumption

6 kg/cm2 / 750 l /min

POWER SUPPLY

Capacity

80 KVA

COOLANT

Motor

0.58 Kw x 2

Coolant pump

540 L

MACHINE SIZE

Machine dimension (LxWxH)

8,560 x 6,535 x 4,660 (4,460) mm

Machine weight

53,000 kg