CNC 5Axis Gantry Machining Center AV-95X

●The GTV-95X is a 5-axis simultaneous control machining center that can adjust the cutting efficiency and quality by tilting the tool as its best cutting edge, without central of tool contact. ●The GTV-95X optimally concentrate the machining process for multiface, intricately shaped ●3-axis program still can run under constant position setting for A,C axis. (Without any cutting interference)

Product Information

先進的五軸同動操控
■HIGH TECHNOLOGY OF 5-AXIS MILLING MACHINING CENTER
  • The GTV-95X is a 5-axis simultaneous control machining center that can adjust the cutting efficiency and quality by tilting the tool as its best cutting edge, without central of tool contact.
  • The GTV-95X optimally concentrate the machining process for multiface, intricately shaped parts, and some difficult position of workpiece where 3-axis can't overcome, such as under cut.
  • Facilitates muliface machining in one chuck to reduce setup work, fixture making and improve the effciency.
  • For depth mould, GTV-95X still can keep high efficiency machining by setting a suitable angle of tool, shorten the length of tool holding.
  • Avoiding accumulative error from series machining procedures, decreasing total cutting time thar substantially achieve the request : High Speed, High Accuracy, High Efficiency.


TRAVEL
X axis (Spindle left/right)
900 mm
Y axis (Table in/out)
600 mm
Z axis (Spindle vertical)
480 mm
Spindle nose to table surface (min/max)
0-480 mm
XYZ drive protection
torque limit coupler direct
TABLE
Size
ø500 mm
T-slot (W x No. x P)
14 x 8 mm
Table type
A、C axis
Max. table load (evenly distributed)
500 Kg
A axis ration
+30°~ -120°
C axis ration
0°~ 360°
SPINDLE (builtin-in)
Spindle speed
24,000 min
Motor
29 kW
Tool taper
HSK-A63
Bearing dia.（I.D.）
ø 70 mm
Oil chiller temp. control
±2°C of machine body temperature
FEEDRATES
Cutting feed
X/Y 1-20,000 mm/min, Z 1-12,000 mm/min
X/Y/Z rapid traverse
X/Y 20,000 mm/min, Z 12,000 mm/min
A rapid axis feedrate
6.25 rpm
C rapid axis feedrate
12.5 rpm
X/Y/Z axis servo motor
4.7 / 8.7 / 4.7 kW
AXES
X/Y/Z axis linear guideway
55×2 / 55×2,45×2 / 45×2 mm
X/Y/Z axis linear ballscrew dia.
Ø50 / 50 / 40 mm
ACCURACY
Linear axis position accuracy
0.004 mm (ISO 230/2)
Linear axis repeatability
<0.002 mm (ISO 230/2)
 
linear scale
without linear scale
Rotating axis position accuracy (sec)
C:8” / A:15”
C:15” / A:45”
Rotating axis repeatability         (sec)
 
C:±2.5” / A: ±2.5”
C: ±3” / A: ±4”
AUTOMATIC TOOL CHANGER (Disk magazine)
Max. tool dia.
Ø30 mm
Max. tool length
220 mm
Max. tool weight
 
7kg
Tool storage capacity
20 tools
AIR SUPPLY
Pressure / Consumption
6 kg/c㎡ / 500 l /min
POWER SUPPLY
Capacity
40 KVA
COOLANT
Coolant pump
2 sets , 0.58 kW ea.
Coolant tank capacity
90 L
MACHINE
Machine dimension (LxWxH)
3,010 x 3,716 x 3,100 mm
Machine weight
12375 kg